– The impeller of the ring blower with an unique design is featured not only for the prevention of noise, but also for more blowing power taking advantage of airflow pressure, as well as air volume inbound.
– Cyclone separation method collects dusts at first and cartridge filter filtrates dusts again.
– Limit switch attached to the damper of the cyclone detects low level of material and automatically transfers the material to the cyclone.
MODEL
Power kw(HP)
Air Volume (㎥/min)
Air Pressure (mm/Aq)
Cyclone Volume(ℓ)
Feeding Line Dia.(mm)
Vacuum Line Dia.(mm)
CTHL-020
1.5(2)
2.5
2500
8
50.8
50.8
CTHL-030
2.2(3)
3.0
2800
8
50.8
50.8
CTHL-050
3.75(5)
3.6
3000
15
50.8
50.8
CTHL-075
5.5(7.5)
4.2
3500
30
60.5
60.5
(Crutec is committed to continuing product improvement. The specification and dimension are subject to change without prior notice.)
Auto Selector(Proportional Valves)
– Auto Selector mixes 2 kinds of material such as virgin and recycled material from different lines and transfer to Hopper Loader by the time controller.
– Compact design saves space and it can be installed in small space. Auto Selector maintains stable operation as it adopts electronic circuit method.
– Operators can identify state of material selection by the side glass window made of transparent acryl attached on the Auto Selector and it's easy to clean inside the Auto Selector by the one touch type of clamp.
MODEL
Mixing Capa.
(kg/hr)
Suction Dia
(mm)
Pressure
(kg/㎠)
Dimension
(W×L×H)(mm)
CTAS-38
200
Ф38.1
5~7
150×370×390
CTAS-50
300
Ф50.8
5~7
150×370×390
(Crutec is committed to continuing product improvement. The specification and dimension are subject to change without prior notice.)
Oven Dryer CTOD Series
– Higher efficiency in drying material because hot air inflows from both left and right side of the chamber enabling even spread between the layers.
– Employing electronic temperature control it minimizes temperature variance.
– Easy to control air volume and protect from inflow of impure things into the dryer by the filter.
MODEL
Capacity(kg)
Steps
Heater Power(kw)
Motor Power(kw)
Dimension(W×L×H)
CTOD-100
100
10
8
0.4
100×900×1500
CTOD-200
200
10X2
8X2
0.75
1800×900×1500
(Crutec is committed to continuing product improvement. The specification and dimension are subject to change without prior notice.)
Plastic Material Tank CTPT Series
MODEL
Capacity(ℓ)
Dimension(W×L×H)
Weight Power(kw)
Material
CTPT-240
240(100kg)
580×740×1075
15.5kg
HDPE
CTPT-120
120(50kg
475×550×925
11.5kg
HDPE
(Crutec is committed to continuing product improvement. The specification and dimension are subject to change without prior notice.)